Introduction
TR7500 SIII CI brings easy Conformal Coating Inspection that combines a multi-camera optical design with specialized multi-phase lighting to inspect UV-active Conformal Coatings. Included angle view cameras ensure the TR7500 SIII CI identifies even the most challenging conformal coating issues.
Featured
Multi-camera UV-Active Coating Inspection
Intuitive Coverage Programming and Easy Training
Accurate Coating Area Measurement
Noise Reduction with Multi-phase Lighting
Optical System | |
|---|---|
| Imaging Method | Dynamic Imaging |
| Top Camera | 4 Mpix |
| Angle Camera | 1.3 Mpix |
| Imaging Resolution | 15 µm |
| Lighting | Multi-phase R/W + UV |
Inspection Performance | |
| Imaging Speed | 120 cm²/sec |
| Motion Table & Control | |
| X-Axis Control | Ballscrew + AC-servo controller |
| Y-Axis Control | Ballscrew + AC-servo controller |
| X-Y Axis Resolution | 1 µm |
Board Handling | |
| Max PCB Size | 510 x 460 mm |
| PCB Thickness | 0.6-5 mm |
| Max PCB Weight | 3 kg |
| Top Clearance | 50 mm |
| Bottom Clearance | 40 mm |
| Edge Clearance | 3 mm [5 mm optional] |
| Conveyor Height | Inline Height: 880 – 920 mm * SMEMA Compatible |
Inspection Functions | |
| Defects | Missing Coating Insufficient Coating Crack Bubble/Void Splash/Smear/Contamination Spill Measurement |
| Measurement | Height Area Volume Offset |
Dimensions | |
| WxDxH | 1100 x 1670 x 1550 mm Note: not including signal tower, signal tower height 520 mm |
| Weight | 1030 kg |
Contact our specialist to learn more
To learn more about the TRI TR7700 SII Plus CI Conformal Coating Inspection System, speak to our sales and technical team they are on hand to support any questions you may have.